Paver
Spreading and pre-compacting the asphalt to the required thickness and slope.
It comes in only at the end, on a base already graded and compacted.
Other names for this machine: paver, paving machine.
- Category
- CACES R.482A category F (special machines)
- Status
- Does not carry interchangeable attachments
What it does
it does not carry the asphalt, it lays it — the screed decides the thickness.
Diagrammatic silhouette, without dimensions and not to scale.
Spreading and pre-compacting asphalt to the required thickness and slope.
What it does not do. It comes in only at the end, on a base already graded and compacted.
what the screed does governs everything that follows.
Synthetic image.
What decides its use
- The volume and the distance They are what decide whether this machine has a place on the site, or whether another will do the same work for less.
- The room available A machine that cannot manoeuvre does not produce, whatever its capacity.
-
The rate of the neighbouring machines
It is rarely calculated and often costs more than the hire:
a machine that waits costs as much as a machine that works. - Transport to the worksite It governs what can actually be sent, and it is settled before everything else.
One model, as a reference point
The values below hold for this model only.
They are there to give an order of magnitude to anyone who has none, not to serve as a reference.
- Basic width
- 2,55 m
- Maximum width
- 10 m
- Maximum theoretical output
- up to 700 t/h
- Hopper capacity
- 13 t
- Maximum laying thickness
- 30 cm
- Engine power
- 129 kW, 127 kW at reduced speed
Source. Vögele technical data sheet, Wirtgen group, reference 3035684 FR,
document of September 2022, recorded on 1 September 2026.
These values are those of one precise model, at one precise date. They do not describe a category:
there are no characteristics of a compact loader in general, there are those of the model you have.
They change from one year to the next and never replace the data sheet of your machine.
Have your machine checked.
Give us the exact model and the work you have in mind.
We check
the coupler, the flow, the pressure and the capacity on your machine,
and we tell you what fits on it — and what does not.
Written study within 3 working days, complete file.
Tell us about your machine Written study within 3 working days, complete file · no obligation