Skip to content
À LA PELLE, the specialist in hydraulic excavator attachments Who is Arnaud Dufour
EN

The site is written in French.
The languages marked here are translated by us:
the French version prevails.

Français Русский English Italiano Deutsch Español
Sorting and gripping

Clamshell bucket with interchangeable shells

A two-shell clamshell bucket, full of soil, under a rotator, comes up out of a round shaft lined with a concrete ring; behind, a yellow excavator of about 20 t. Computer-generated image.
The clamshell comes up out of a round shaft, shells closed on the soil.
The rotator lines it up with the concrete ring, and the excavator stays in place.
Computer-generated image.

A single bucket body, several sets of shells.
The same clamshell digs a shaft, a narrow trench between utilities, or rehandles soil from earthworks.
You change the shells, not the clamshell.

Other names for this tool: earthmoving clamshell bucket, rotating clamshell bucket, shaft clamshell bucket, trench clamshell bucket, shell bucket, bivalve bucket, hydraulic clamshell bucket, bivalve grab.

The essentials
Family
Sorting and gripping
Classes (t)
Excavators from 9 to 25 t
Shells
Interchangeable:
earthmoving, narrow trench, shaft; from 325 to 1,200 mm wide
Capacity
From 125 to 625 l with earthmoving shells, depending on the model
Functions
Hydraulic closing and rotation; shells changed in about 4 minutes

See the whole family →

01 Use

What it is for

A shaft, a manhole, a narrow trench between utilities:
a bucket attacks at an angle and tears out too wide.
The clamshell bucket goes down vertically, closes on the soil and comes back up.
The excavation keeps its width.

The work changes from one site to the next:
a round shaft here, a narrow trench there, earthworks elsewhere.
Rather than one clamshell per use, this one keeps the same body and takes shells of different shapes and widths.
The change takes around 4 minutes, according to the manufacturer.

Earthmoving shells

Wide, they take from 125 to 625 l depending on the model.
They are used for foundation excavation on congested sites, for earthworks along walls and fences, and for rehandling bulk materials.

Narrow-trench shells

Narrow, from 325 mm wide, they dig a trench without widening it.
They are the answer for trenches between existing utilities, where every centimetre of width counts.

Shaft shells

They dig shafts and manholes of around 1,000 mm.
The clamshell goes down in line with the shaft, closes and comes back up.
The exact diameter is checked in the study.

Hydraulic rotation

In a narrow excavation, you do not move the excavator to orient the grab.
Hydraulic rotation lines the shells up with the trench or the shaft, from the cab.
It adds a function to supply:
that point is checked on the excavator.

A full clamshell over a shaft is a load at the end of the arm. Empty, the clamshell weighs from 475 to 1,250 kg depending on the model, and the soil adds to that.
The load is read on the excavator's load chart, arm extended, at the actual depth.

02 Key technical data

On which machine?

It fits tracked or wheeled excavators from 9 to 25 t.
The size of the clamshell is chosen on the excavator class, its flow and its load chart.
It attaches to the excavator's mounting plate or to its quick coupler, confirmed in the study.
For other excavator classes, see the Clamshell bucket page.

What the tool does

A bucket body with hydraulic rotation takes three sets of shells:
earthmoving, narrow trench and shaft.
The shells range from 325 to 1,200 mm wide; with earthmoving shells, the clamshell takes from 125 to 625 l depending on the model.
Changing the shells takes around 4 minutes; empty, the clamshell weighs from 475 to 1,250 kg depending on the model.

What is needed on the hydraulic side

It needs a hydraulic circuit for closing and for rotation.
The flow ranges from 40 to 150 l/min depending on the model.
The number of lines fitted on the excavator, the flow and the pressure are checked in the study.

Figures taken from 2 models on the market.
Your study sets the exact value for your machine.

How to read these values →

03 Your study

Have your excavator checked.

Give us your excavator model, its coupler and the hydraulic lines already fitted.
Tell us the work:
shaft, trench or earthworks, with the width and the depth to be reached.

What we need to answer you
  • Your excavator Its make, its model and its tonnage.
  • The auxiliary circuit The number of lines, the flow in l/min and the pressure in bar.
  • The coupler in place Its system and its class, or a photo.
  • The work Shaft, narrow trench or earthworks; the diameter or the width, and the depth.
  • The ground Soil, sand, gravel or fill, and the presence of water in the excavation.

Without these details, the study still begins:
we will ask you for them.

Book an appointment with the specialist

Or call 01 84 16 55 49 · our lines are open 7 days a week, from 7h to 22h.

Written study within 3 working days, once the file is complete.

04 Choice

What determines the choice

  • 01 — The sets of shells Earthmoving, narrow trench, shaft:
    you take the sets the site needs, not all of them.
  • 02 — The shell width From 325 to 1,200 mm:
    the narrowest for the trench, the widest for volume.
  • 03 — The excavator class From 9 to 25 t:
    the clamshell size follows the excavator's flow and load chart.
  • 04 — The rotation It lines up the shells without moving the excavator:
    it needs one more hydraulic function.
  • 05 — The depth It is read on the excavator's working range diagram, arm and clamshell included:
    not on the data sheet of the clamshell alone.
05 Check

What is checked before ordering

  • The hydraulic lines How many are fitted, and with what flow:
    closing and rotation depend on them.
  • The excavator's load chart Clamshell full, arm extended over the excavation.
  • The shaft diameter It is compared with the opening of the shaft shells, in the study.
  • The interface Coupler type and size, or pin dimensions.
To go further