Clamshell bucket for mini-excavators
Cordoned-off housing estate street, utilities site.
Computer-generated image.
A manhole, a narrow trench between two utilities, a small shaft:
there, a bucket struggles.
The clamshell bucket goes straight down, closes on the soil and comes back up.
This version is made for micro- and mini-excavators from 1 to 3.5 t.
Other names for this tool: mini-excavator clamshell bucket, bivalve bucket, shell bucket, rotating clamshell bucket, digging grab, clamshell (English term).
- Family
- Sorting and gripping
- Classes
- 1 to 3.5 t:
micro- and mini-excavators - Capacity
- 25 to 100 l per grab, depending on the model
- Shells
- Two shells from 250 to 400 mm wide
- Rotation
- Hydraulic, continuous
What it is for
A bucket fills by scraping, then tips:
it needs room.
In a manhole, a draw pit or a narrow trench already carrying ducts, that room does not exist.
The clamshell bucket works vertically:
it goes down, closes and comes back up.
The page Clamshell bucket covers the tool for excavators from 1 to 100 t.
This one is the version for small machines:
micro- and mini-excavators from 1 to 3.5 t, the ones used for utilities, roads and landscaping.
It weighs from 90 to 160 kg and takes from 25 to 100 l per grab, depending on the model.
Manholes and small shafts
The clamshell goes straight down into the opening and comes back up full, without scraping the walls.
Manholes, draw pits, small shafts and spot excavations are dug from the edge.
Trenches between utilities
Between two ducts or two pipes already laid, a bucket lacks the room to scrape.
The clamshell takes the soil in line with the trench, with shells from 250 to 400 mm wide depending on the model.
Continuous rotation
Continuous hydraulic rotation lines the shells up with the excavation without moving the machine.
On a mini-excavator wedged into a narrow street, that is what makes the clamshell usable.
Landscaping and rehandling
Planting in confined spaces, rehandling soil or gravel between two walls:
the clamshell takes what the bucket cannot reach.
The clamshell does not exempt you from locating utilities. Before digging between ducts, the utilities are located and marked, whatever the tool.
A full clamshell, with the arm extended over a manhole, is an unfavourable position for a small machine:
the load is read on the load chart.
On which machine?
It fits on a 1 to 3.5 t micro- or mini-excavator, via a mounting plate suited to its coupler.
It weighs from 90 to 160 kg depending on the model.
The loaded weight is checked on the machine's load chart, at the actual reach.
What the tool does
Two shells from 250 to 400 mm wide close on the material and take from 25 to 100 l per grab, depending on the model.
Continuous hydraulic rotation lines them up with the excavation.
It takes soil, sand, gravel and spoil from manholes and small trenches.
What is needed on the hydraulic side
It needs from 10 to 75 l/min depending on the model, for opening, closing and rotation.
Closing and rotation make two functions to supply:
the circuits on your mini-excavator are checked in the study.
Figures taken from 2 models on the market.
Your study sets the exact value for your machine.
Have your mini-excavator checked.
Give us the model of your mini-excavator, its coupler and its hydraulic circuits.
Add the width and depth of the excavations:
the shell width and the model are chosen on that basis.
- Your machine Its make, its model and its tonnage.
- The coupler in place Its system, or a photo.
- The hydraulic circuits How many lines, their flow in l/min and their pressure in bar.
-
The excavations
Width and depth:
manhole, trench, small shaft. -
The material
Soil, sand, gravel, spoil:
it sets the shape of the shells.
Without these details, the study still begins:
we will ask you for them.
Or call 01 84 16 55 49 · our lines are open 7 days a week, from 7h to 22h.
Written study within 3 working days, once the file is complete.
What determines the choice
-
01 — The width of the excavation
It gives the width of the shells:
from 250 to 400 mm depending on the model. -
02 — The machine class
From 1 to 3.5 t:
on a small machine, the weight of the tool and the soil shows up on the load chart. -
03 — The depth to be reached
It is read on the machine's working range diagram, arm and tool included:
it is often the deciding factor. -
04 — The rotation
Continuous and hydraulic:
it adds a function to supply, to be checked on the machine. -
05 — The material
Firm soil, sand, gravel:
toothed shells bite in, smooth shells hold the fines.
What is checked before ordering
-
What the machine can supply
Auxiliary lines fitted, flow and pressure:
closing and rotation make two functions. - The loaded weight It is read on the machine's load chart, at the actual reach, with the clamshell full.
- The utilities Located and marked before digging, whatever the tool.
-
The interface
The mini-excavator's coupler type:
the mounting plate is specified in the study.
- Family
- Sorting and gripping
- Carrier machine
- Mini-excavator
- The trade
- Pipelayer and services