Electric tracked barrow
The operator is at the controls, the door open to the outside.
Computer-generated image.
A battery-powered motorised barrow on tracks.
It takes rubble out of a building with zero exhaust emissions, and with less noise than a combustion engine.
It recharges from a socket, during the break or in the evening.
Other names for this machine: electric barrow on tracks, electric mini dumper, electric motor barrow, lithium tracked barrow, electric tracked dumper, electric tracked carrier, electric power barrow.
- Family
- Handling and lifting
- Payload
- From 500 to 800 kg depending on the model
- Power source
- Lithium battery, recharged from a socket; zero exhaust emissions
- Charging
- Depending on the model; around 1.5 to 3 h on a 700 kg model
- Carrier machine
- None:
it runs on its own tracks, electric motor on board
What it is for
Indoors, in a town centre or near local residents, a barrow with a combustion engine is a nuisance because of its fumes and its noise.
In an enclosed space, its exhaust fumes stay in the room.
The electric tracked barrow does the same work with zero exhaust emissions.
Its lithium battery recharges from a socket, during the break or at the end of the day.
The tracks go over soft ground, slabs and fragile ground.
It suits indoor sites, occupied buildings and low-emission zones.
Indoor work
With no exhaust emissions, it works in a building under renovation, a cellar, a basement or a hall.
It also makes less noise than a combustion-engine barrow, which counts in an occupied building.
The lithium battery
It recharges from a power socket.
The voltage, the capacity and the charging time vary with the model.
For example, a 700 kg model carries a battery of around 48 V and 120 Ah, recharged in 1.5 to 3 h.
The payload
It ranges from 500 to 800 kg depending on the model.
It is counted in weight:
wet rubble reaches the limit before the body is full.
For local authorities and hire companies
In a low-emission zone or in a municipality's green spaces, it replaces the combustion engine.
For a hire company, it is an electric tracked machine to add to the fleet.
Run time is checked against the shift, not the data sheet. It depends on the model, the load, the slope and the distance.
Before choosing, work out the length of the shift and find a socket for recharging.
On which machine?
It is a self-contained machine:
it does not fit on any carrier.
It runs on its tracks with its electric motor, and is transported on a trailer or a flatbed.
It is loaded by hand, with a mini-excavator or with a compact loader.
What the tool does
It carries from 500 to 800 kg depending on the model, in a body that tips to empty.
Rubble, soil, sand, gravel, fresh concrete or green waste.
The type of body and its control are checked on the chosen model.
What is needed on the hydraulic side
It needs no connection to an excavator:
its hydraulics are on board, powered by its battery.
All it needs is a power socket for recharging; the battery and the charger are specified according to the model.
Battery and charging figures taken from one model on the market.
Your study sets the exact value for your machine.
Have your site checked.
Tell us what you are taking out, over what distance, and for how long each day.
Give us the width of the narrowest point, and tell us where the nearest socket is.
- The load Rubble, soil or fresh concrete, and the weight to be taken out per day.
-
The access
The narrowest width on the route:
door, corridor, path. - The shift Its length, and the breaks when the battery can recharge.
- The socket A power socket on the site, and its distance from the charging point.
- The ground Slab, soft ground, slope, thresholds or steps on the route.
Without these details, the study still begins:
we will ask you for them.
Or call 01 84 16 55 49 · our lines are open 7 days a week, from 7h to 22h.
Written study within 3 working days, once the file is complete.
What determines the choice
-
01 — The payload
From 500 to 800 kg depending on the model:
it is counted in weight, not in volume. -
02 — The battery
Voltage, capacity and charging vary from one model to another:
the choice is made on the length of the shift. -
03 — Charging
A socket on the site, during the break or in the evening:
it is organised before delivery. -
04 — The width
It is compared with the narrowest point:
door, corridor or path. -
05 — Electric or combustion
Indoors and on occupied sites, the electric one;
to tip high into a site skip, the high-tip barrow.
What is checked before ordering
- The power socket Its presence on the site and its distance from the charging point.
- The length of the shift It is compared with what the battery lasts, load and slope included.
-
The narrowest point
Door, corridor, path:
it decides the model. - The ground on the route A new slab or a fragile surface is protected before the machine goes over it.
- Family
- Handling and lifting
- Neighbouring machine
- Power barrow
- The trade
- Local authorities and roads