High-tip tracked barrow
In front of the house under renovation, no more heap to shovel up again.
Computer-generated image.
A motorised barrow on tracks, whose body rises before tipping.
It takes rubble out through a door or a garden, and tips it over the side of a site skip.
No more heap to shovel up again, less carrying by hand.
Other names for this machine: tracked motor barrow, high-lift barrow, high-tip barrow, tracked mini dumper, high-tip dumper, tracked carrier, combustion-engine power barrow.
- Family
- Handling and lifting
- Payload
- Around 700 kg to 1 t, depending on the model
- Tipping body
- High lift:
it rises before tipping; tipping height around 1.3 m - Access width
- Narrow version around 69 cm wide
- Carrier machine
- None:
it runs on its own tracks, combustion engine on board
What it is for
On a renovation or interior demolition site, the rubble goes out through a door, a corridor or a garden.
The lorry and the loader cannot get through.
The tracked barrow makes the trip between the loading point and the skip.
A barrow with a low body tips onto the ground:
the heap then has to be shovelled up again to fill the skip.
With the high-lift body, the load rises first, then tips over the side of the site skip or the container.
The heap at the foot of the skip disappears, and the carrying by hand with it.
High tipping
The body rises, then tips.
It tips at a height of around 1.3 m, depending on the model, into a site skip or a container.
Before choosing, compare this height with that of the side of the skip to be filled.
Narrow access
The narrow version is around 69 cm wide:
it is made for tight access.
Measure the narrowest point on the route before choosing the model.
The 1 t model is used when the volume to be taken out matters more than the width.
The tracks
The tracks carry the load on soft ground, on gentle slopes and on fragile ground.
The barrow is loaded by hand, with a mini-excavator or with a compact loader.
Combustion or electric
This barrow has a combustion engine, petrol or diesel depending on the model.
To work in an enclosed space or in a low-emission zone, see the electric tracked barrow.
With the body raised, the load goes up and so does the centre of gravity. The body is raised when stationary, on flat and stable ground, never on a side slope.
The payload is counted in weight:
wet rubble reaches the limit before the body is full.
On which machine?
It is a self-contained machine:
it does not fit on any carrier.
It runs on its tracks under its own engine, and is transported on a trailer or a flatbed.
It is loaded by hand, with a mini-excavator or with a compact loader.
What the tool does
The body rises before tipping:
it tips at a height of around 1,265 to 1,300 mm, depending on the model.
The payload is around 700 kg to 1 t; the narrow version is around 690 mm wide.
It carries rubble, soil, sand, gravel, fresh concrete and green waste.
What is needed on the hydraulic side
It needs no connection to an excavator:
its hydraulics are on board, driven by its own engine.
This engine is a combustion engine, petrol or diesel depending on the model.
Figures taken from listings, for 2 models on the market.
Your study sets the exact value for your machine.
Have your site checked.
Tell us what you are taking out, over what distance, and where you tip it.
Give us the width of the narrowest point and the height of the side of the skip to be filled.
-
The access
The narrowest width on the route:
door, gate, path. - The skip to be filled The height of its side, site skip or container.
- The load Rubble, soil, sand or fresh concrete, and the volume to be taken out per day.
- The ground Soft ground, slab, slope, thresholds or steps on the route.
- The loading By hand, with a mini-excavator or with a loader, and the site address.
Without these details, the study still begins:
we will ask you for them.
Or call 01 84 16 55 49 · our lines are open 7 days a week, from 7h to 22h.
Written study within 3 working days, once the file is complete.
What determines the choice
-
01 — The tipping height
It is compared with the side of the skip to be filled:
if it is a few centimetres short, the heap has to be handled again. -
02 — The access width
The narrow version gets through where the 1 t model does not:
measure before choosing. -
03 — The payload
Around 700 kg to 1 t depending on the model:
it is counted in weight, not in volume. -
04 — The engine
Petrol or diesel depending on the model;
in an enclosed space, look at the electric version. -
05 — Transport
It arrives on a trailer or a flatbed:
its weight and dimensions are checked against the vehicle.
What is checked before ordering
- The side height Measured on the site skip or container actually in place.
-
The narrowest point
Door, gate, path:
it decides the model. - The tipping position Flat, stable ground at the foot of the skip, to lift safely.
- The ground on the route A fragile slab or a new surface is protected before the machine goes over it.
- Family
- Handling and lifting
- Neighbouring machine
- Power barrow
- The trade
- Landscaper