Skip to content
À LA PELLE, the specialist in hydraulic excavator attachments Who is Arnaud Dufour
EN

The site is written in French.
The languages marked here are translated by us:
the French version prevails.

Français Русский English Italiano Deutsch Español
Sorting and gripping

Clipping machine for road-rail excavators

A yellow road-rail excavator, rail wheels lowered onto the track, carries at the end of its arm a frame straddling the rail whose pushers drive the elastic fastenings onto new concrete sleepers, in open country. Computer-generated image.
Straddling the rail, the clipping machine drives the elastic fastenings onto the new sleepers.
The road-rail excavator works from the track, rail wheels lowered.
Computer-generated image.

On a railway track, every sleeper carries elastic fastenings that hold the rail.
The clipping machine fits or removes them from the road-rail excavator, sleeper after sleeper.
The clips are no longer fitted one by one, by hand.

Other names for this tool: clip machine, elastic fastening applicator, unclipping machine, fastening fitting and removal tool, clip driver (English term).

The essentials
Family
Sorting and gripping
Carrier machine
Road-rail excavator; excavator class checked in the study
Functions
Fitting and removal of elastic fastenings
Rate
20 to 40 sleepers per minute, depending on the job
Options
Kits for two fastening types; sleeper lifter as an option

See the whole family →

01 Use

What it is for

The rail is held on the sleeper by elastic fastenings, also called clips.
When laying new track, during renewal or maintenance, they have to be driven in or removed on hundreds of sleepers.
By hand, it is slow, and it is a repetitive movement that wears people out.

The clipping machine fits at the end of the arm of the road-rail excavator, already on the track.
It straddles the rail and drives in or removes the fastenings, at 20 to 40 sleepers per minute depending on the job.
It draws its power from the excavator's hydraulic circuit.

Fitting and removal

The same tool works both ways.
When fitting, it drives the fastenings into their seats; when removing, it pulls them out before the rail is taken away.
It is also used to replace fastenings during maintenance work.

Two fastening types

Kits make it possible to switch from one type of elastic fastening to the other:
two types are provided for.
The type fitted on your track is noted before ordering:
it decides the kit.

The optional sleeper lifter

A sleeper lifter can complement the tool.
Its usefulness and its fitting are discussed in the study, depending on the job.

On which tracks

New or renewed track, service tracks, private sidings:
wherever the job is carried out with a road-rail excavator.
Access to the track and site protection are arranged beforehand, with the line operator.

On a track, the tool is the last question. Access to railway property, site protection and acceptance of the machine are arranged with the line operator.
Approval of the tool for the network concerned is checked in the study.

02 Key technical data

On which machine?

The clipping machine fits on a road-rail excavator, via a mounting plate suited to its coupler.
The excavator class and the weight of the tool depend on the model:
they are checked in the study.
The excavator works from the track, rail wheels lowered.

What the tool does

It fits and removes elastic fastenings, sleeper after sleeper.
The rate ranges from 20 to 40 sleepers per minute, depending on the job.
Kits cover two fastening types; a sleeper lifter is offered as an option.

What is needed on the hydraulic side

It draws its power from the road-rail excavator's hydraulic circuit, via the auxiliary line.
The flow and pressure required depend on the model:
they are checked in the study.

Figures taken from 1 model on the market.
Your study sets the exact value for your machine.

How to read these values →

03 Your study

Have your road-rail excavator checked.

Tell us which fastenings and which sleepers are fitted, which road-rail excavator you have and the size of the job.
Also tell us the framework within which the operator authorises you to work.

What we need to answer you
  • The fastenings Their type, with a photo of a fastening in place.
  • The sleepers Concrete or timber, and their condition.
  • Your road-rail excavator Its make, its model, its tonnage and its coupler.
  • The auxiliary circuit Its flow in l/min and its pressure in bar.
  • The site The number of sleepers to be handled, fitting or removal, and the time on track granted.

Without these details, the study still begins:
we will ask you for them.

Book an appointment with the specialist

Or call 01 84 16 55 49 · our lines are open 7 days a week, from 7h to 22h.

Written study within 3 working days, once the file is complete.

04 Choice

What determines the choice

  • 01 — The fastening type The clipping machine is set up for the fastening fitted:
    the kit is chosen on the type observed, not assumed.
  • 02 — Fitting, removal or both The same tool does both operations:
    tell us which one dominates on your job.
  • 03 — The road-rail excavator Its class and its coupler decide the model and the mounting plate:
    they are checked in the study.
  • 04 — The number of sleepers From 20 to 40 sleepers per minute:
    the longer the job, the more the rate counts compared with fitting by hand.
  • 05 — The sleeper lifter Offered as an option:
    it is decided in the study, depending on the job.
05 Check

What is checked before ordering

  • The conditions of access to the track They come from the operator and govern everything else.
  • Approval It is checked in the study, for the network and operator concerned.
  • The auxiliary line The excavator's flow and pressure, compared with those of the chosen model.
  • The fastening type Noted on the track, with a photo as evidence:
    it decides the kit.