Skip to content
À LA PELLE, the specialist in hydraulic excavator attachments Who is Arnaud Dufour
EN

The site is written in French.
The languages marked here are translated by us:
the French version prevails.

Français Русский English Italiano Deutsch Español
Sorting and gripping

Hydraulic coach screwing machine for road-rail excavators

A worker in orange workwear drives a coach screw into a timber sleeper with a hydraulic wrench held in both hands; the black hoses run to a yellow road-rail excavator stopped on the adjacent track. Computer-generated image.
The coach screwing machine is held in both hands and drives the coach screw into the timber sleeper.
Its hoses connect it to the road-rail excavator stopped on the adjacent track.
Computer-generated image.

On a railway track, the fastenings are held by coach screws and bolts that have to be screwed in, unscrewed and retightened.
This coach screwing machine is held in both hands and connects by hoses to the road-rail excavator.
No combustion engine on board:
the power comes from the excavator already on the track.

Other names for this tool: hydraulic bolting machine, track bolting machine, hydraulic impact gun, coach screw driver, portable hydraulic coach screwing machine, hydraulic impact wrench (English term).

The essentials
Family
Sorting and gripping
Carrier machine
Road-rail excavator, via its hydraulic outlet
Torque
340 to 1,630 Nm depending on the model; up to 3,390 Nm for fishplate bolts
Power source
15 to 45 l/min at 70 to 140 bar; no combustion engine
Use
Coach screws, fastening bolts and fishplate bolts

See the whole family →

01 Use

What it is for

On track laid on timber sleepers, the rail is held by coach screws, large screws driven into the sleeper.
Elsewhere, it is fastening bolts; at rail joints, fishplate bolts.
During laying, renewal and maintenance, all of these are screwed in, unscrewed and retightened.

Standard coach screwing machines carry their own combustion engine.
This one does not:
it connects by hoses to the road-rail excavator's hydraulic circuit.
That is one less engine to start, refuel and maintain on the site.

Coach screws and fastening bolts

It tightens from 340 to 1,630 Nm depending on the model.
It screws in the coach screws during laying, unscrews them before a sleeper is removed or replaced, and retightens the fastening bolts during maintenance.

Fishplate bolts

At rail joints, fishplate bolts need more torque.
Some models go up to 3,390 Nm; their flow and pressure are checked in the study.

Power from the excavator

The road-rail excavator is already on the track, with its hydraulics.
The coach screwing machine connects to it by hoses:
no fuel to carry along the track, no second engine to watch over.

The sockets

The socket is chosen to match the head of the coach screws and bolts on your track.
Sockets, hoses and couplings are specified in the study.

The excavator's outlet is set to suit the tool. The coach screwing machine needs from 15 to 45 l/min at 70 to 140 bar depending on the model:
supplied above that, it overheats and wears.
The outlet setting is checked in the study, before the first connection.

02 Key technical data

On which machine?

It connects by hoses to the auxiliary hydraulic outlet of a road-rail excavator.
It does not fit at the end of the arm:
the operator holds it in both hands, beside the excavator.
Any road-rail excavator whose outlet delivers the required flow and pressure can power it; this is checked in the study.

What the tool does

It tightens from 340 to 1,630 Nm depending on the model, for coach screws and fastening bolts.
For fishplate bolts, some models go up to 3,390 Nm.
The weight and the sockets depend on the model:
they are checked in the study.

What is needed on the hydraulic side

It needs from 15 to 45 l/min at 70 to 140 bar, depending on the model.
The excavator's outlet is set to these values; the hoses and couplings are specified in the study.

Figures taken from models on the market, to be confirmed.
Your study sets the exact value for your machine.

How to read these values →

03 Your study

Have your road-rail excavator checked.

Tell us which coach screws and which bolts are fitted on your track, and which road-rail excavator you have.
We check its hydraulic outlet, the sockets and the model with you.

What we need to answer you
  • The coach screws and bolts Their type and their head, with a photo.
  • The work Laying, removal, retightening, fishplate bolts.
  • Your road-rail excavator Its make, its model and its tonnage.
  • The hydraulic outlet Its flow in l/min, its pressure in bar, and the coupling type.
  • The site The number of sleepers to be handled and the framework set by the operator.

Without these details, the study still begins:
we will ask you for them.

Book an appointment with the specialist

Or call 01 84 16 55 49 · our lines are open 7 days a week, from 7h to 22h.

Written study within 3 working days, once the file is complete.

04 Choice

What determines the choice

  • 01 — The torque required Coach screws and fastening bolts, or fishplate bolts:
    it is not the same model.
  • 02 — The excavator's outlet From 15 to 45 l/min at 70 to 140 bar depending on the model:
    the outlet must be adjustable to these values.
  • 03 — The sockets They are chosen to match the heads of the coach screws and bolts on the track:
    measured, not assumed.
  • 04 — The hose length The operator works beside the excavator:
    the length is set by the distance between the outlet and the sleeper to be handled.
  • 05 — No engine on board No fuel and no starting up on the track:
    the power comes from the excavator already in place.
05 Check

What is checked before ordering

  • The hydraulic outlet Flow, pressure and coupling, read on the excavator.
  • The conditions of access to the track They come from the operator and govern everything else.
  • Approval It is checked in the study, for the network and operator concerned.
  • The hoses Their condition and their length; a worn hose is changed before work starts.