Mixing bucket for compact loaders
The mesh is in place, the compact loader stays at the edge.
Computer-generated image.
The concrete is made in the compact loader's bucket, right by the formwork.
The blades mix, the hatch opens, the concrete drops where it needs to be poured.
For small volumes, where the truck mixer cannot get through.
Other names for this tool: concrete mixer bucket for compact loaders, mixer bucket, mini-loader mixer, concrete bucket for compact loaders, universal quick-attach mixing bucket, loader concrete mixer, skid steer mixing bucket.
- Family
- Recycling and recovering
- Tub
- From 100 to 350 l depending on the model
- Coupler
- Compact loader universal quick-attach
- Power source
- Hydraulic:
from 20 to 90 l/min and from 150 to 215 bar depending on the tub - Carrier machine
- Compact loader on wheels or on tracks
What it is for
On a landscaping or masonry site, concrete is often poured in small quantities:
a fence footing, a kerb, a small slab.
The truck mixer cannot get through, or the volume does not justify it.
The mixing bucket makes this concrete on site, in the compact loader's bucket.
Hydraulically driven blades mix cement, aggregate and water in the tub.
The loader carries the bucket to the formwork and empties the tub through a hatch.
The concrete drops where it needs to be poured, without a wheelbarrow or rehandling.
The universal quick-attach
The bucket fits on the compact loader's universal quick-attach, like an ordinary bucket.
Its hoses connect to the loader's auxiliary hydraulic line.
Discharge through a hatch
A hydraulic hatch opens above the formwork.
It is closed again when the required volume has been poured, and the loader goes back for the next batch.
The tub size
The tubs range from 100 to 350 l.
The volume is chosen on what has to be poured per shift, and on what the loader can lift with the tub full.
For a 2.5 to 8 t excavator, see the Mixing bucket page; above 750 l, the high-capacity mixing bucket.
With the tub full, the bucket weighs far more than when empty. The loader's payload is checked with the tub full of concrete, not with the bucket empty.
A poorly rinsed mixer sets solid:
wash it at the end of the shift.
On which machine?
It fits wheeled and tracked compact loaders with a universal quick-attach.
The loader must have an auxiliary hydraulic line, and a payload that can carry the full tub.
The model is chosen in the study, from the loader's data sheet.
What the tool does
A steel tub from 100 to 350 l, with blades driven by a hydraulic motor.
Discharge is through a hydraulic hatch.
Empty, the bucket weighs around 170 to 425 kg depending on the tub.
What is needed on the hydraulic side
It needs the loader's auxiliary hydraulic line, in continuous operation during mixing.
The flow ranges from 20 to 90 l/min and the pressure from 150 to 215 bar, depending on the tub.
The loader's actual flow is checked in the study.
Figures taken from 3 ranges on the market.
Your study sets the exact value for your machine.
Have your loader checked.
Give us the model of your compact loader, its auxiliary flow and its payload.
Tell us what you are pouring, and how much per shift.
- Your loader Its make and its model, on wheels or on tracks.
- The auxiliary circuit Its flow in l/min and its pressure in bar.
- The payload The one on the loader's data sheet, or a photo of its plate.
- The work Concrete, mortar or sand-cement mix, and the volume to be poured per shift.
- Access The way through to the formwork, and the water point on the site.
Without these details, the study still begins:
we will ask you for them.
Or call 01 84 16 55 49 · our lines are open 7 days a week, from 7h to 22h.
Written study within 3 working days, once the file is complete.
What determines the choice
-
01 — The volume per shift
The tub is chosen on what has to be poured per shift:
not on the volume of the whole job. -
02 — The payload
With the tub full, it is the payload that decides:
a large tub on a small loader cannot be lifted safely. -
03 — Continuous flow
The blades turn throughout the batch:
the flow is counted as continuous, not peak. -
04 — The material
Concrete, mortar or sand-cement mix:
the mixing time and the wear on the blades change. -
05 — Supplies
Water, cement and aggregate have to arrive close to the pouring point:
it is this logistics that sets the pace.
What is checked before ordering
- The loader's flow Measured on the auxiliary line, under working conditions.
- The payload with the tub full The empty weight of the bucket plus the concrete, against the loader's data sheet.
- The coupler A compact loader universal quick-attach, in good condition.
- Cleaning A water point to rinse the tub at the end of the shift.
- Family
- Recycling and recovering
- Carrier machine
- Skid-steer loader
- The trade
- Landscaper