Hydraulic firewood processor
Here on a telehandler, the machine the tool was designed for.
Illustration based on an existing product.
A chainsaw and a splitter in the same frame, at the end of the arm.
The trunk goes in whole, it comes out as logs, and the operator does not leave the cab.
The split wood falls straight into the trailer.
Other names for this tool: combined saw-splitter, hydraulic saw-splitter, log cutter-splitter, firewood combi machine, firewood processing machine, firewood processor (English term).
- Family
- Forest and wood
- Wood
- Trunks up to 55 cm in diameter and 3 m long; logs from 300 to 650 mm
- Splitting
- 25 t ram; hydraulically adjustable wedge, 4-, 6- or 8-way
- Power source
- Auxiliary line, 90 to 130 l/min and 210 to 260 bar; three hoses and a 12 V power supply
- Carrier machine
- Telehandler, loader or excavator, with a hitching interface made for it
What it is for
Making firewood is first of all a matter of handling:
you load the trunk, you cut it, you carry the round to the splitter, you pick the logs up again.
The firewood processor does it all in the same frame, at the end of the machine's arm.
The operator controls everything from the cab, from loading the trunk to the finished log.
Because the tool works up high, the split wood falls straight into the trailer or onto the heap:
nobody picks it up by hand.
Load, feed, cut
Forks pick up the trunk, up to 3 m long.
A sliding plate feeds it up to the stop, it clamps itself, and a chainsaw with a 750 mm bar cuts it.
The log length is adjustable from 300 to 650 mm.
Split
The round drops in front of the wedge, and a 25 t ram pushes it through.
The wedge height is adjusted hydraulically, and the wedge is chosen as 4-, 6- or 8-way depending on the log size required.
A 12-way wedge exists for rounds of 40 cm and over.
For which machines
The tool was designed for the telehandler, whose long boom loses flow:
it keeps up good performance when little oil reaches it.
On a loader or an excavator, it is fitted via a hitching interface made for the machine.
It leaves the factory with a flat plate, onto which this interface is bolted or welded.
The tool weighs 1,600 kg, empty. At the end of an extended arm, it is the machine's load chart that says yes or no, not the catalogue.
During cutting and splitting, nobody stands near the frame:
the chain runs fast and the logs fall.
On which machine?
The firewood processor fits on a telehandler, a loader or an excavator able to carry 1,600 kg at the working distance.
It needs 90 to 130 l/min on the auxiliary line:
on a small excavator, this flow is often lacking, and that is checked in the study.
The hitching interface is made for your machine; it is priced separately.
What the tool does
It cuts and splits trunks up to 55 cm in diameter and 3 m long; an extension takes trunks of 4 m.
The chainsaw has a 750 mm bar, and its chain runs at 23 to 46 m/s.
The ram splits at 25 t; it backs off a few millimetres at the end of the cut, to free the round from the chain.
The tool measures 2.3 m long, 1.6 m wide and 1.9 m high.
What is needed on the hydraulic side
It needs 90 to 130 l/min and 210 to 260 bar.
It connects with two 3/4" hoses and a 3/8" drain hose, plus a 12 V electrical supply with an indicator light.
The chain oil tank holds 11 litres.
Figures taken from the data sheet of one model on the market.
Your study sets the exact value for your machine.
Have your machine and your wood checked.
Give us the machine that will carry the tool, its flow, and the wood you process.
We check the load, the flow and the hitching before pricing.
-
The machine
Telehandler, loader or excavator:
make, model and tonnage. - The auxiliary circuit Its flow in l/min, its pressure in bar, and whether there is a free return for the drain.
- The coupler A photo of the coupler in place, or of the mounting plate of your tools.
- The wood Diameter and length of the trunks, species, and log length required.
- The volume How many steres per year, and where the wood is stored.
Without these details, the study still begins:
we will ask you for them.
Or call 01 84 16 55 49 · our lines are open 7 days a week, from 7h to 22h.
Written study within 3 working days, once the file is complete.
What determines the choice
-
01 — The carrier machine
The telehandler is the machine the tool was designed for;
the loader and the excavator need a made-to-measure interface. -
02 — The flow
From 90 to 130 l/min:
this is often what rules out small machines. -
03 — The load
1,600 kg at the end of the arm:
the capacity is read on the load chart, at the distance where the tool works. -
04 — The trunk diameter
Up to 55 cm:
beyond that, the wood is split down first, or handled another way. -
05 — The log required
Length from 300 to 650 mm, and a 4- to 12-way wedge:
it is the firewood customer who decides.
What is checked before ordering
- The auxiliary line The machine's flow and pressure, compared with the tool's 90 to 130 l/min and 210 to 260 bar.
- The drain A free return to tank for the 3/8" hose.
- The lifting capacity 1,600 kg at the working distance, read on the machine's load chart.
- The hitching interface Bolted or welded onto the tool's plate, made for your coupler.
- Family
- Forest and wood
- Carrier machine
- Site telehandler
- The trade
- Forestry and silviculture